Proyek Akhir Pengaruh Kecepatan Udara Dan Laju Aliran Pendingin Terhadap Kualitas Kopi Sangrai
AbstractAbstrack Coffee is a type of drink that is popular with almost all people in the world, this drink goes through many processing stages to produce coffee drinks that have good taste, aroma and color. So that the process of post-harvest, washing, slime removal, drying, fermentation, roasting, cooling, grinding (milling) and serving must be considered.This study discusses forced cooling after roasting with the aim of keeping the coffee beans from experiencing continuous heat changes and increasing brittleness. So that in this study analyzing the effect of forced cooling on coffee beans using a medium with air velocity for testing the quality of roasted coffee from 1.54 m / s to 4.38 m / s, the effect of cooling flow rate on the quality of roasted coffee is 0.0834 L / s up to 0.24102 L / s and the Effect of Air Velocity and Cooling Flow Rate of 1.32 (m / s) and 0.054 (L / s) to 6.12 (m / s) and 0.324 (L / s) then a measuring instrument is installed four thermocouples at the top to measure the intake air and four thermocouples at the base of the coffee beans to measure the temperature of the coffee beans and one Hot Wire Anemometer gauge to collect data on the flow rate of air coming out of the cooling medium using a blower and water cooling as a cooling medium to force after roasting the coffee beans cool down in a relatively short time. The purpose of this study was to see the characteristics of coffee beans that were forced to cool from the color, aroma and resilience of the coffee beans. the effectiveness is only 2.57%.Keywords: Roasting, Forced Cooling, Blower and Water Cooling, Coffee Beans
Copyright info for authors
1. Authors hold the copyright in any process, procedure, or article described in the work and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors retain publishing rights to re-use all or portion of the work in different work but can not granting third-party requests for reprinting and republishing the work.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) as it can lead to productive exchanges, as well as earlier and greater citation of published work.