Perancangan Proteksi Katodik pada Tangki Olein Kapasitas 450 KL dengan Metode SACP
--
DOI:
https://doi.org/10.35143/elementer.v10i1.6218Abstract
Cathodic protection is needed as corrosion mitigation in oil tanks on land to minimize internal and external corrosion. Corrosion problems that often arise in tanks are corrosion on the shell, roof and bottom. In this research, a corrosion protection system was designed for an olein storage tank with a capacity of 450 kL for one of the palm oil ship industries located in Kalimantan. The corrosion protection used is SACP (Sacrificial Anode Cathodic Protection) where active anodes are used to protect metal surfaces which are more passive against corrosion attacks. To provide good corrosion protection, sufficient current, number of anodes and correct placement are required. From the calculation results it was found that for the shell, the current required is 0.0102446 A with a total of 46 anodes and the placement of each anode is 5.36 m. For the same bottom and roof, each requires a current of 0.0103869 A with 7 anodes and a distance within a radius of 6.74 m.Downloads
Published
Issue
Section
License
Copyright (c) 2024 Dianita - Wardani, Budi Prasojo
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.
