Rancang Bangun Sistem Kontrol Dan Monitoring Beban 1 dan 3 Phasa Pada Panel Distribusi Berbasis Internet of Things
DOI:
https://doi.org/10.35143/elementer.v10i1.6235Abstract
The distribution panel is a place to distribute and distribute electrical energy from the power panel to the load panel (consumer) for both power installations and lighting installations. The main problem with every disturbance or improvement in electricity usage is that people need to come to the area to control and monitoring the panel manually. This research focuses on the design and manufacture of control and monitoring devices at 3 and 1 phase loads, with the method using NodeMCU esp 32/8266 with pzem004t sensor as control and reading of voltage, current and frequency on the panel, which can be viewed and controlled offline at panel or online using the blynk application. The testing of the tool is carried out using a 3-phase motor, PC monitor, fan, laptop charger, and chicken lamp. By turning on the load one by one or simultaneously. From the test results, the tool can turn on and off online through the blynk application and manually using a push button. the results obtained are quite accurate with a maximum error percentage of 8.70%. However, the microcontroller between control and monitoring is used separately.Downloads
Published
Issue
Section
License
Copyright (c) 2024 Muzni Sahar, yoga pangestu, Arif Gunawan, Hedri Novia
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.
