Rancang Bangun Sistem Pemantauan Tekanan dan Suhu Ban Berbasis Internet of Things dan Software Defined Radio

Authors

  • Hendy Briantoro a:1:{s:5:"en_US";s:17:"Telkom University";}
  • Anang Budikarso Electronic Engineering Polytechnic Institute of Surabaya image/svg+xml
  • Arifin Electronic Engineering Polytechnic Institute of Surabaya image/svg+xml
  • Yoedy Moegiharto Electronic Engineering Polytechnic Institute of Surabaya image/svg+xml
  • Mohammad Yanuar Hariyawan Universitas Telkom

DOI:

https://doi.org/10.35143/elementer.v10i1.6277

Abstract

There are many motor vehicle accidents on the road, one of the causes being tire blowouts. These accidents occur because drivers continue to drive their vehicles even though the tire pressure and temperature exceed the specified threshold. To address this issue, there is a need for a tire pressure and temperature monitoring system that can be continuously monitored by the driver. If there is a malfunction in the monitoring device on the vehicle dashboard, the driver can be alerted by others who also monitor tire pressure and temperature information remotely. In this study, we developed a tire pressure and temperature monitoring system for vehicles that can be accessed remotely using Internet of Things (IoT) technology. Additionally, we utilized Software Defined Radio (SDR) technology for pressure and temperature data reading. This system successfully monitors tire pressure and temperature changes remotely via computer and smartphone. Based on the test results, the best standard deviation value for tire pressure is 3.54, while the best standard deviation value for tire temperature is 1.72

Downloads

Published

31-05-2024

Issue

Vol. 10 No. 1 (2024): Jurnal Elektro dan Mesin Terapan (ELEMENTER)

Section

Article

License

Copyright (c) 2024 Hendy Briantoro, Anang Budikarso, Arifin, Yoedy Moegiharto, Mohammad Yanuar Hariyawan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Rancang Bangun Sistem Pemantauan Tekanan dan Suhu Ban Berbasis Internet of Things dan Software Defined Radio. (2024). Jurnal Elektro Dan Mesin Terapan, 10(1), 65-74. https://doi.org/10.35143/elementer.v10i1.6277

Most read articles by the same author(s)