Rancang Bangun Mesin Pemeras Tebu 3 Roll dengan Penyajian Otomatis
DOI:
https://doi.org/10.35143/elementer.v8i1.5389Abstract
Sugarcane juice can be taken by squeezing sugarcane stalks using a squeeze machine. The existing squeezing machines are still not efficient and relatively low production speed. The main factor of machine performances was on rolls quantity and its arragement. To overcome this problem, we have designed and fabricated the machine with 3-rolls by optimally speed and inter-rolls distance setting. The squeezer rolls were driven by 1-phase motor with fixed speed by the gear ratio setting. The distance and position between the rolls are arranged in such a way that the pressing power is maximized, but it is maintained to avoid stuck. The peeled and cut sugarcane is loaded into the hopper. Then, the sugar cane is drawned and squeezed by rolls. After that, it filtered and stored in the container. This machine is equipped with an automatic system for dispensing sugarcane juice from the container to the glass. The results show that the efficiency of this machine is around 65.1% with 78.1 ml/s production speed. Sugarcane juice produced is relatively clean without contaminated by it dregsDownloads
Published
Issue
Section
License
Copyright (c) 2022 Jajang Jaenudin, Septika Ambarwati
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.
