Pengaruh Ketebalan Material Terhadap Shielding Effectiveness pada Frekuensi Rendah
DOI:
https://doi.org/10.35143/elementer.v7i2.5176Abstract
Today, the need for electronic devices with smaller and more compact dimensions integrating many functions is increasing. At the same time, the need for ubiquitous processor speed, clock, data rate, and wireless connectivity is also increasing. This increase in demand also results in an increase in electromagnetic interference (EMI) in the environment. Although rare, High-Impact, Low-Frequency (HILF) events have the potential to have a deleterious impact on the electric power system. In this study, an analysis of shielding effectiveness (SE) was carried out at low frequencies when the thickness of the shielding material was varied. The materials used in this research are aluminum sheet and aluminum foil, and they combine their thickness through a single layer or double layer scheme. The thickness of the shielding material affects the value of shielding effectiveness; as evidenced when the thickness of the material is increased to 2 times, an increase in the value of shielding effectiveness reaches 207%. The use of double layers shows an increase in shielding effectiveness which is better than increasing the thickness of the material.Downloads
Published
Issue
Section
License
Copyright (c) 2021 Mohammad Yanuar Hariyawan, Rizadi Sasmita Darwis, Siska Novita Posma
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.
