Performansi Throughput Jaringan 4G Pada Lantai 2 Blok 6 Kampus PCR
Performansi Throughput Jaringan 4G Pada Lantai 2 Blok 6 Kampus PCR
DOI:
https://doi.org/10.35143/elementer.v10i1.6195Abstract
Nowadays, 4G cellular service has become a basic need especially for campus communities. Information exchange and learning processes often utilize technology in this service. Block 6, floor 2 of the PCR campus consists of 2 lecturer rooms, 4 laboratories, 1 meeting room and 1 research room. Of course, this is one of the spots in PCR where 4G service is needed. Of the several 4G service providers in Indonesia, Telkomsel is the operator that has the most customers. 4G network performance can be seen in several parameters such as RSRP, RSRQ, CSFB, Throughput and SINR. These parameters are obtained through a process called Drive Test (DT). Drive Tests carried out by walking in closed areas such as inside buildings, malls, and such are called Walktests (Indoor Drive Tests). This research is focused on observing only one parameter, namely throughput. From this research, the maximum throughput value for Telkomsel's 4G network in Block 6, Floor 2, PCR Campus at the time of measurement (July 13 2023 at 16.43 WIB) was 2.18 Mbps. So when compared with the KPI set by Telkomsel, the throughput value in block 6, floor 2 of the PCR campus is in the "fairly good" category. Keywords: 4G, Drive Test, ThroughputDownloads
Published
Issue
Section
License
Copyright (c) 2024 Noptin Harpawi
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License.
